Talk:Spark gap

From Wikipedia, the free encyclopedia

WikiProject Physics This article is within the scope of WikiProject Physics, which collaborates on articles related to physics.
??? This article has not yet received a rating on the assessment scale. [FAQ]
??? This article has not yet received an importance rating within physics.

Help with this template Please rate this article, and then leave comments to explain the ratings and/or to identify its strengths and weaknesses.

Contents

[edit] Cyan isn't blue?

I don't consider it vandalism [1] to use the most familiar term; in a general sense, cyan is a shade of blue to most people, just as magenta or fuchsia might be considered pink (indeed, as the cyan article notes, cyan often goes undistinguished from light blue). To state in the article that cyan is not blue [2] implies that the reader's perceptions are wrong. I've rephrased to what I hope is an acceptable compromise, "cyan or blue." -- Wapcaplet 15:54, 30 Oct 2004 (UTC)

[edit] Clarify the difference

Between sparks, arcs, and corona discharges. Also the pieces of hot metal formed by something like shorting a charged capacitor or a 9 V battery. - Omegatron 01:22, Jun 1, 2005 (UTC)

Well, for sparks and arcs, I'd say "no difference". A corona discharge is clearly different, being a diffuse (dispersed) discharge rather than a single (or few) heavily ionized conduction channels.
Atlant 13:57, 1 Jun 2005 (UTC)
Ok. Here is a good description of the differences between corona, spark, and brush discharge: [3]. There's a few related articles, and a bunch of redirects/disambigs. Probably some should be merged/re-redirected. "Spark" can refer to pretty much all of them. - Omegatron 14:52, Jun 1, 2005 (UTC)

[edit] Maxwell Forces

[edit] Matl culled from page

I dont think this is correct;

However, the heated air is not what causes the arc to rise. The arc rises because of what is known from Maxwell's equations. Maxwell's equations state that a current through a normal magnetic field will cause a force on the current in the direction given by the right-hand rule. This force is what causes the arc to rise.

--Light current 04:10, 31 March 2006 (UTC)

On 3/29 129.81.191.133 added the following:
"However, the heated air is not what causes the arc to rise. The arc rises because of what is known from Maxwell's equations. Maxwell's equations state that a current through a normal magnetic field will cause a force on the current in the direction given by the right-hand rule. This force is what causes the arc to rise."
I disagree. If the above were true, then, if the diverging pair of wires was inverted so that the narrowest portion was at the top, then the arc should travel downwards from the top. This is not observed (at least for low current high voltage arcs). Lorentz Forces acting upon the arc are directly proportional to arc current. In the case of the travelling arc, the typical arc current is usually less than an ampere. Although J x B forces do become significant for high current (kA or MA) arcs seen in railguns, HV circuit breakers, and high current spark gaps, for low current traveling arcs the upward movement is almost entirely due to rising hot air. Bert 04:28, 31 March 2006 (UTC)
Thanks for the clarification. I'm sure you could tell that this is my first time getting into a disagreement on Wiki, and I was frustrated because I didn't know how to contact the person disagreeing with me. -David Drinnan

Just put your comments on the talk page. Editors will probably see them there!--Light current 08:43, 31 March 2006 (UTC)

[edit] Articles

[edit] Redirects

This site says there are 4 types of electrical breakdown of air, Glow Discharges, Corona, Sparks, and Arcs. - Omegatron 14:21, August 2, 2005 (UTC)
Thanks for those links!
Atlant 14:38, 2 August 2005 (UTC)
Very good links with equations and theory: Excerpts from Dielectric Phenomena in High Voltage Engineering, F.W. Peek, McGraw-Hill, 1929 - Omegatron 17:44, August 2, 2005 (UTC)

[edit] Sparks and arcs

Peek says: "By spark-over is generally meant the disruption of a gaseous dielectric from one conductor to another conductor. Strictly speaking it is the name applied to the initial discharge and not the arc that follows." - [4]

[edit] Gas Discharge Tube

Gas Tubes are ceramic arresters utilizing a spark gap, but often called a spark gap. Why?

Its a spark gap with ioinsed gas surrounding the elctrodes to make it fire more predicatably/at a lower voltage. The ceramic is just the casing.--Light current 17:14, 23 June 2006 (UTC)


[edit] New moving image

THe new image is really great. But is it possible to make it a bit bigger so we can really see whats happening>--Light current 17:50, 23 June 2006 (UTC)

Whoops- looks like a copyvio!--Light current 17:53, 23 June 2006 (UTC)