County highway

From Wikipedia, the free encyclopedia

Shields for Hillsborough County Route 581 in Tampa, Florida.
Shields for Hillsborough County Route 581 in Tampa, Florida.
Current county highway shield in most states
Current county highway shield in most states

A county highway (also county road or county route; usually abbreviated CH or CR) is a road in the United States and in the Canadian province of Ontario that is designated and/or maintained by the county highway department. Route numbering can be determined by each county alone, by mutual agreement among counties, or by a statewide pattern. County highway shields are usually a yellow-on-blue pentagon (the MUTCD standard pattern), a black-on-white rectangle, or black text on a white rectangle (largely older signs). The majority of states have county highways, as they have unincorporated areas that are not part of any municipality.[original research?] Some states, like Virginia and North Carolina, have no county highways in most of their counties; the state government maintains all roads in unincorporated areas. Others, like Connecticut, have no county routes because there is no government at the county level. Alaska does not have counties; Louisiana's county equivalents are parishes, and, accordingly, have parish routes.

In addition, any county-maintained road, whether or not it is given a signed number, can be called a county road. Depending on the state and county, these roads can be named after local geographic features, communities, or people and/or be assigned a name determined be a standardized grid reference; for example: “East 2000 Road” would be a north-south road running 20 blocks/miles/km east of the designated zero point. Many other systems are also used; some counties rather arbitrarily assign numbers to all maintained roads, but do not sign them at all or only sign them on standard street sign blades.

County roads and highways vary greatly in design standards, funding and regularity of maintenance. Some county highways in urban areas are freeways or expressways. County roads that link communities or serve residential areas are often indistinguishable from state highways or residential streets. In rural areas, many county roads carry very little traffic; these roads are maintained less frequently. They may be in poor condition (if they are paved) or not paved at all. In remote areas, county roads are made of sand, gravel, or graded earth, seeing only occasional foot, equestrian, and four wheel drive traffic. Some states, such as Wisconsin, use county highways in great numbers, linking major highways and cities or towns to each other.

An example of a Wisconsin county trunk highway shield
An example of a Wisconsin county trunk highway shield
Another standard style of county highway shield used in some US states.
Another standard style of county highway shield used in some US states.

In Minnesota, some county roads are known as County state-aid highways. These roads are constructed and maintained by counties, but they are eligible for funding from the County State Aid Highway Fund. Differences in signage between CSAH routes and other county roads depends on the county. Some counties, such as Stearns County, delineate between the two by using the "standard" blue pentagon shield for CSAH routes and Minnesota's normal white square shield for other county routes. [1] Most county roads in Minnesota are designated with numbers, although a few in Dodge County utilize letters instead. It should be noted that the "County Road B, County Road C, etc etc" system used in Ramsey County is not a route system, but instead is Ramsey County's way of naming east-west section roads north of the St. Paul city limits. A few roads that cross county borders are also signed with an "Intercounty" designation and a letter, but this system is not shown on most maps.[2]

In the United States, county highways are denoted in various ways, differing by state. In states like Wisconsin, county highways are marked with letters--in Wisconsin with 1 to 3 letter combinations (ie: C, CC, or CCC). Wisconsin's county highways are frequently and clearly marked at most intersections. In states like Illinois, county highways are marked either with a number (usually 1 or 2 digits) or with a single letter followed by a 1 or 2 digit number (ie: V-34, A-29). These highways are usually marked at the beginning of the highway and marked occasionally throughout the route, but are not majorly relied on as geographic directions the way more major highways (state or federal and interstate) are. In New Jersey, there are two sets of county routes, the 500-series (500-599) which usually run through multiple counties, but are county-maintained, and the 600-series (600-799) which are usually contained within a single county. In New Jersey, county routes are usually signed just as well as state routes, including mile or half-mileposts, and appearances on BGS's (Big Green Signs) on freeways.

[edit] Canada

See also: List of Ontario County Numbered Roads.

In Canada, numbered county roads are only found in Ontario, where they are similar to American county highways. Ontario county or regional roads are marked with trapezoid-shaped signs, usually (but not necessarily) with a white, green, or blue background, and normally identifying the county or region responsible for the road's maintenance, sometimes with the jurisdiction's coat of arms or corporate logo. The county road network has been present for many years, but has only been signed with the flowerpot logos since the 1970s and early 1980s (depending on the area). Previously, the roads simply had road names, such as "Essex Road 42" or "Kent County Road 14", and so on, but had no shields to designate them. Many Ontario county roads are built to provincial highway standards, as thousands of kilometres of highways were downloaded from the province to counties and regional municipalities in 1997 and 1998, and most of the downloaded highways were rolled into the county road systems. In some situations, these in turn were downloaded from the region/county to the local municipalities. See: List of Ontario County Numbered Roads.

Not all jurisdictions in Ontario which maintain a county road system use the name "County Road" to designate them, however — depending on the type of census division which maintains them, they may also be designated as Regional Road, Municipal Road, Regional/County Highway or City Road. In the unincorporated districts of Northern Ontario, as there is no county level of government the province maintains a secondary highway system to serve the same function.

In addition to county roads, many townships also have concession roads and township roads, such as Colchester South Road 3, and Concession 8. These do not have shields (only names on signs and maps), aside from one exception: former Highway 620. It was downloaded to the Peterborough and Hastings County governments, and in one section, the highway was downloaded further to the township of Wollaston, and is now signed as "Wollaston Township 620", with a municipal sign similar to an Ontario Tertiary Highway. [1]

County/Regional roads in Ontario are styled by this basic "Flowerpot" design. This shield is of York Regional Road 8.

Niagara Regional Road 20 shield. While Niagara generally conforms to the standard Ontario "flowerpot" design, the shields are white-on-blue rather than the more traditional black-on-white and have rounded corners.

Essex County Road 22 Shield, a typical county road shield in Essex County, Ontario.

[edit] See also

Wikimedia Commons has media related to:

[edit] References

  1. ^ Froehlig, Adam. Twin Cities Highways: Definitions and Acronyms. Retrieved on 2006-03-28.
  2. ^ Riner, Steve (2003). County Highways and Jurisdictional Changes. The Unofficial Minnesota Highways Page. Retrieved on 2006-08-18.
v • d • e
Types of road
High-speed
Access via
interchanges
Other access
Low-speed
Standard
Low traffic
Other
Surfaces