Cone (geometry)

From Wikipedia, the free encyclopedia

This article is about the geometric object. For other uses, see Cone.

A right circular cone and an oblique circular cone

A cone is a three-dimensional geometric shape that tapers smoothly from a flat, round base to a point called the apex or vertex. More precisely, it is the solid figure bounded by a plane base and the surface (called the lateral surface) formed by the locus of all straight line segments joining the apex to the perimeter of the base. The term "cone" sometimes refers just to the surface of this solid figure, or just to the lateral surface.

The axis of a cone is the straight line (if any), passing through the apex, about which the lateral surface has a rotational symmetry.

In general, the base may be any shape, and the apex may lie anywhere (though it is often assumed that the base is bounded and has nonzero area, and that the apex lies outside the plane of the base). For example, a pyramid is technically a cone with a polygonal base. In common usage in elementary geometry, however, cones are assumed to be right circular, where right means that the axis passes through the centre of the base (suitably defined) at right angles to its plane, and circular means that the base is a circle. Contrasted with right cones are oblique cones, in which the axis does not pass perpendicularly through the centre of the base.

1 Other mathematical meanings
2 Further terminology
3 Formula
- 3.1 Right circular cone
4 See also
5 External links

[edit] Other mathematical meanings

In mathematical usage, the word "cone" is used also for an infinite cone, the union of any set of half-lines that start at a common apex point. This kind of cone does not have a bounding base, and extends to infinity. A doubly infinite cone, or double cone, is the union of any set of straight lines that pass through a common apex point, and therefore extends symmetrically on both sides of the apex.

The boundary of an infinite or doubly infinite cone is a conical surface, and the intersection of a plane with this surface is a conic section. For infinite cones, the word axis again usually refers to the axis of rotational symmetry (if any). One half of a double cone is called a nappe.

Depending on the context, "cone" may also mean specifically a convex cone or a projective cone.

[edit] Further terminology

The perimeter of the base of a cone is called the directrix, and each of the line segments between the directrix and apex is a generatrix of the lateral surface. (For the connection between this sense of the term "directrix" and the directrix of a conic section, see dandelin spheres.)

The base radius of a circular cone is the radius of its base; often this is simply called the radius of the cone. The aperture of a right circular cone is the maximum angle between two generatrix lines; if the generatrix makes an angle θ to the axis, the aperture is 2θ.

A cone with its apex cut off by a plane parallel to its base is called a truncated cone or frustum. An elliptical cone is a cone with an elliptical base.

[edit] Formula

See also: Cone (geometry) proofs.

The volume $V$ of any conic solid is one third the area of the base $b$ times the height $h$ (the perpendicular distance from the base to the apex).

$V = \frac{1}{3} b h$

The center of mass of a conic solid of uniform density lies one-quarter of the way from the center of mass of the base to the vertex, on the straight line joining the two.

[edit] Right circular cone

For a circular cone with radius r and height h, the formula for volume becomes

$V = \frac{1}{3} \pi r^2 h.$

For a right circular cone, the surface area $A$ is

$A =\pi r^2 + \pi r s\,$ where $s = \sqrt{r^2 + h^2}$ is the slant height.

The first term in the area formula, $π r 2$ , is the area of the base, while the second term, $π r s$ , is the area of the lateral surface.

A right circular cone with height $h$ and aperture $2θ$ , whose axis is the $z$ coordinate axis and whose apex is the origin, is described parametrically as

$S(s,t,u) = \left(u \tan s \cos t, u \tan s \sin t, u \right)$

where $s, t, u$ range over $[0,θ)$ , $[0,2π)$ , and $[0, h]$ , respectively.

In implicit form, the same solid is defined by the inequalities

$\{ S(x,y,z) \leq 0, z\geq 0, z\leq h\}$ ,

where

$S(x,y,z) = (x^2 + y^2)(\cos\theta)^2 - z^2 (\sin \theta)^2.\,$ .

More generally, a right circular cone with vertex at the origin, axis parallel to the vector $d$ , and aperture $2θ$ , is given by the implicit vector equation $S (u) = 0$ where