Pedestrian separation structure

From Wikipedia, the free encyclopedia

This bridge allows pedestrians over I-64 in St. Louis, Missouri, USA

A Pedestrian separation structure is any structure that removes pedestrians from a vehicle roadway. This creates a road junction where vehicles and pedestrians do not interact.

This can be considered a type of grade separation structure on the road.

These structures can be located either above the roadway or below the roadway. In the U.S., access under the Americans with Disabilities Act requirements means that stairs cannot be the only access to these structures. An elevator must be provided or a ramp built that conforms to the grade requirements under the ADA regulations.

In the broadest sense, building codes that limit the number of driveways that cross sidewalks may be viewed as making the sidewalks a separation structure.

In many areas, tunnels under major roadways are provided in wilderness areas to allow wildlife to cross roadways without risking accidents. While not specifically built for people, they could be used by people in those areas.

1 History
2 See also
3 References
4 External links

[edit] History

This tunnel at MIT allows pedestrians to get between buildings on either side of Vassar Street

Many of the early forms of these structures were provided to cross limited-access highways in areas that were built up and lacked intersections. By allowing pedestrians and bicycles to cross over the highway, these bridges were viewed as low-cost alternatives to intersections.

In the 1999, Las Vegas, Nevada began a major effort to install pedestrian bridges at major intersections, to reduce traffic congestion and improve pedestrian safety.^[1]