Laser peening
From Wikipedia, the free encyclopedia
Laser peening is the process of hardening or peening metal using a powerful laser. Laser peening can impart a layer of residual compressive stress on a surface that is four times deeper than that attainable from conventional shot peening treatments."[1] Laser peening is often used to improve the fatigue resistance of highly stressed critical turbine engine components, and the laser (or component) is typically manipulated by an industrial robot.
Prototype laser peening machines were developed in the 1970s, but they and subsequent versions over the past two decades were not cost effective because the lasers lacked the high repetition rate required for treating parts rapidly.[1]
[edit] See also
[edit] References
- ^ Laser Peening. Metal Improvement Company (2004). Retrieved on 2006-10-16.
 |
This industry-related article is a stub. You can help Wikipedia by expanding it. |
