Detention basin
From Wikipedia, the free encyclopedia
A detention basin is an stormwater management facility installed on, or adjacent to, tributaries of rivers, streams, lakes or bays that is designed to protect against flooding and, in some cases, downstream erosion by storing water for a limited period of a time. These basins are also called "dry ponds" or "dry detention basins". In its basic form a detention basin is used to manage water quantity while having a limited effectiveness in protecting water quality.[1]
Contents |
[edit] Functions and Design
Detention basins are storm water best management practices (BMPs) that provide general flood protection and can also control extreme floods such as a 100-year storm.[2] The basins are typically built during the construction of new land development projects including residential subdivisions or shopping centers. The ponds help manage the excess runoff generated by newly-constructed impervious surfaces such as roads, parking lots and rooftops.
A basin functions by allowing large flows of water to enter but limits the outflow by having a small opening at the lowest point of the structure. The size of this opening is determined by the capacity of underground and downstream culverts and washes to handle the release of the contained water.[3]
Frequently the inflow area is constructed to protect the structure from some types of damage. Offset concrete blocks in the entrance spillways are used to reduce the speed of entering flood water. These structures may also have debris drop vaults to collect large rocks. These vaults are deep holes under the entrance to the structure. The holes are wide enough to allow large rocks and other debris to fall into the holes before they can damage the rest of the structure. These vaults must be emptied after each use.[clarify]
[edit] Extended Detention Basin
A variant basin design called an extended detention dry basin can limit downstream erosion and control of some pollutants such as suspended solids. This basin type differs from a retention basin, also known as a "wet pond," which includes a permanent pool of water, and which is typically designed to protect water quality.[4] [5] [6]
While basic detention ponds are often designed to empty within 6 to 12 hours after a storm, extended detention (ED) dry basins improve on the basic detention design by lengthening the storage time, for example, to 24 or 48 hours. Longer storage times tend to result in improved water quality because additional suspended solids are removed.[7]
[edit] See also
- Best management practice for water pollution
- Retention basin
- River reclamation
- Sustainable urban drainage systems
[edit] References
- ^ United States Environmental Protection Agency. Washington, DC."National Menu of Stormwater Best Management Practices." Fact Sheet: "Dry Detention Ponds."
- ^ Atlanta Regional Commission. Atlanta, GA. "Georgia Stormwater Management Manual." Section 3.4.1: "Dry Detention / Dry ED Basins." August 2001.
- ^ Dykehouse, Terry, P.E. Jones and Edmunds, Gainseville, FL."Retention Ponds and Detention Ponds, The Recovery Process."
- ^ Water Environment Federation, Alexandria, VA; and American Society of Civil Engineers, Reston, VA. "Urban Runoff Quality Management." WEF Manual of Practice No. 23; ASCE Manual and Report on Engineering Practice No. 87. 1998. ISBN 1-57278-039-8. Chapter 5.
- ^ Detention Basins, Chapter 4: Best Management Practices. Agricultural and Biological Engineering, College of Agriculture and Life Sciences. James Worth Bagley College. http://www.abe.msstate.edu/csd/p-dm/all-chapters/chapter4/chapter4/det-basin.pdf
- ^ Stormwater Detention Ponds. Chapter 5, Minnesota State Permit Guidance Document. http://proteus.pca.state.mn.us/publications/swm-ch5.pdf
- ^ Water Environment Federation et al, op. cit.
[edit] External links
- StormwaterAuthority.org - Guide to Detention & Retention
- Detention vs. retention - Project Brays (Harris County, Texas)
- Maintaining Your BMPs: A Guidebook for Private Owners & Operators in Northern Virginia
|
|||||||||||
