Caterpillar D9

From Wikipedia, the free encyclopedia

Caterpillar D9 - General Characteristics
Engineering Role: Heavy bulldozer
Propulsion: Caterpillar tracks
Engine model: CAT C18 ACERT (D9T)
3408 HEUI (D9R)
Gross power: 464 hp (346 kW) D9T
474 hp (354 kW) D9R
Flywheel power: 410 hp (306 kW) D9T
410 hp (306 kW) D9R
375 hp (280 kW) D9N
460 hp (343 kW) D9L
Drawbar pull: 71.6 tons
Operation Weight: 107,550 lbs (48,784 kg)
Length: 26.5 ft (8.1 m)
Width: 14.7 ft (4.5 m) (blade)
Height: 13 ft (4 m)
Speed: 7.3 MPH (11.9 km/h) Forward
9.1 MPH (14.7 km/h) Reverse
Blade capacity: 17.7 yd³ (13.5 m³) 9 SU blade
21.4 yd³ (16.4 m³) 9 U blade
D9 early model
D9 early model
CAT D9L, the first D9 model to employ the "high drive" configuration.
CAT D9L, the first D9 model to employ the "high drive" configuration.

The Caterpillar D9 is a large track-type tractor designed and manufactured by Caterpillar Inc.

Though it comes in many configurations it is usually sold as a bulldozer equipped with a detachable large blade and a rear ripper attachment.

The D9, with 354 kW (474 hp) of gross power and an operating weight of 49 tons, is in the upper end, but not the heaviest, of Caterpillar's track-type tractors, which range in size from the D3 57 kW (77 hp), 8 tons, to the D11 698 kW (935 hp), 104 tons.

The size, durability, reliability, and low operating costs have made the D9 one of the most popular large track-type tractors in the world, with the Komatsu D275A as one of its most direct competitors.

Contents

[edit] Engineering and technical description

The D9 is a series of heavy tracked-type tractors, propelled by Caterpillar tracks and usually used as bulldozers.It came out as a protoype in 1954 as a D9X.10 D9X prototype models were built in 1954.In 1955 the 286hp D9 was introduced to compete against the Euclid TC-12 which had more hp.The D9 would come equipped with a 1,473 cid D353 which would power the D9 right up until the 1980 introduction of the D9L.The year 1956 the D9 got a boost up to 320hp.The new 335hp D9E would replace that model n 1959.2 years later the legendary 385hp D9G would appear in 1961 and would be on the scene for the next 13 years.Over its 13 year life the D9G would be the main crawler on many,many job sites testifying to its sturdyness and design.In 1965 west coast businessman Buster Peterson hooked up a pair of D9Gs to pushload the largest wheel tractor scrapers built.In 1986 Caterpillar bought the rights to this concept and thus the 770hp DD9G was created.D stands for Dual D9G.Peterson also built the first SxS D9G which has 2 D9Gs side-by-side pushing a 24 foot wide bulldozer blade.In 1969 Cat introduced this new SxS D9G.In 1974 the improved 410hp D9H was introduced to replaced the D9G.The D9H is still the more powerful conventional track-type tractor in company history.The DD9H and the SxsD9H would soon follow.In 1980 the 460hp D9L was introduced.The unit had the same elevated drive sprocket undercarraige that the larger D10 had.It was in the time period of 1970-71 that a D9G was built with a elevated drive sprocket undercarriage .A picture of one can be found on page 95 in a book called "Caterpillar Chronicle" by Eric Orlemann.The D9 has undergone several generations of engineering enhancements. Each new model is denoted with an English letter added to D9 like D9E,D9G,D9H,D9L,D9N,D9R and the current D9T.. Until the introducing of the D10 in 1977 at a dealer meeting, the D9H was the largest conventional CAT dozer. The D9L was the first variation of the D9 to employ elevated drive sprocket design in which the drive sprocket is elevated above the track., and not on the ground. The elevated drive sprocket gives the "belly pan" more ground clearance.The eleveated drive sprocket undercarriage is a modular design.To repair the machines you break down the tracks and pull the drive sprockets out.As a result you can pull the powershift transmission out the rear.The 370hp D9N replaced the D8L in 1987.In 1988 Caterpillar produced their 25,000th elevated drive sprocket track-type tractor which a D9N.The 405hp D9R replaced the D9N in 1996.The 410hp D9T replaced the D9R in 2004.The D9T has a ACERT diesel engine. The current versions are the D9R and the D9T models, but older models such as the D9N and D9L are still common. The L, N, R and T models of the D9 are visually very similar, differing primarily in the design of their internal systems.he D9L was replaced by the 520hp D10N in 1987.The 370hp D9N replaced D8L in 1987.the The D9T main difference from the D9R is the installment of the new Cat C18 ACERT engine. The D9L is the most powerful D9 in history, with flywheel power of 460 hp.

The D9's primary working tools are the blade, affixed to the front and controlled by 6 hydraulic arms, and the optional ripper, which can be attached to the back. The blade is mainly intended for earthmoving and bulk material handling: pushing up sand, dirt and rubble. It also can be used to push other heavy equipment such as earthmoving scraper pans, and in military applications, main battle tanks. The dozer blade usually comes in 3 varieties:

  1. A Straight Blade ("S-Blade") which is short and has no lateral curve, no side wings, and can be used for fine grading.
  2. A Universal Blade ("U-Blade") which is tall and very curved, and has large side wings to carry more material.
  3. A "S-U" combination blade which is shorter, has less curvature, and smaller side wings. This blade is typically used for pushing piles of large rocks, such as at a quarry.

Like many other bulldozers, the D9 can be fitted with different blades (such as size-9 SU blade and Universal blade) or other devices such as mineplows.

The rear ripper is intended for use in loosening rocky ground and ripping out larger stones. It can also break frozen ground and excavate small ditches. The ripper can be replaced with a multi-shank ripper, allowing the bulldozer to comb the ground.

The size, power and weight of the larger track-type tractors dictate that they are used primarily for major projects. The D9 is most commonly found in use in construction, forestry, mining, waste, and quarry operations.

[edit] Military applications

An armored IDF Caterpillar D9R bulldozer, nicknamed "דובי" (Teddy bear) in Israel. Its armor allows it to work under heavy fire.
An armored IDF Caterpillar D9R bulldozer, nicknamed "דובי" (Teddy bear) in Israel.
Its armor allows it to work under heavy fire.
See also: Armored bulldozer

Caterpillar Inc. does not manufacture a military version of the D9 per se, but the attributes that make the D9 popular for major construction projects make it desirable for military applications as well, and in this role - with Israeli modifications and armor - it has been particularly effective for the Israel Defense Forces (IDF) and later for the United States armed forces (the Marine Corps and the US Army) in Iraq.[1]

The Israeli Engineering Corps used armored versions of the D9L, D9N and D9R to clear booby-trapped areas, open routes, rescue stuck armored fighting vehicles and build sand mounds.[citation needed] During the Al Aqsa Intifada D9 bulldozers were used to demolish alleged terrorists' houses under fire, as the dozers withstood massive IEDs (some of 200 kg and even 500 kg of explosives) and even deflected RPG rounds and were impervious to machinegun fire. [2] The armored D9 bulldozers were cited by experts as one of the key factors for the relatively low casualties of the IDF in urban warfare. [3] However, while Israel saw the utilization of bulldozers as a security necessity, it drew controversy for the destruction it caused to Palestinian property, especially in Rafah and in Jenin (during Operation Defensive Shield).

On February 7, 2006, the Synod of the Church of England decided to divest itself of approximately USD$2.2 million in Caterpillar Inc. shares, property of the Church of England. This was seen as a move to distance itself from the Israeli army's alleged use of the Caterpillar bulldozers to destroy Palestinian homes.[citation needed]

The US army used D9 bulldozers to clear forest in the Vietnam war but after the war they were replaced with smaller and cheaper Caterpillar D7G bulldozers. D7G dozers are still very common in US combat engineering battalions, but there is a resurgent high demand to replace the lighter D7Gs with the newer and more heavily armored D9s.

[edit] See also

[edit] External links

Wikimedia Commons has media related to:

[edit] References

  1. ^ Video of US Army / US Marine teams working with civilian contractors from KBR Heavy Equipment Transport, using D9s at Ar Rutbah to build a large defensive berm
  2. ^ The blade that won the battle, Israeli Intelligence Heritage Center (Hebrew)
  3. ^ Urban Warfare and the Lessons of Jenin, Yigal Henkin